TaoTronics Bluetooth 5.0 Transmitter/Receiver, Wireless 3.5mm Audio Adapter (aptX Low Latency, Pair 2 at Once, for TV/Car Sound System, Volume Control)
- Bluetooth transmitter and receiver: Transmitter function transforms 3. 5mm audio-out media devices into a Bluetooth device capable of streaming Bluetooth Audio; receiver lets non-Bluetooth devices like car or home Stereos receive high quality Audio.
- Instant sound: enjoy a latency lower than 95% of other devices with aptX Low Latency technology; end-to-end lag time is now 40 milliseconds so high-definition video is transmitted without problems in transmitter mode.
- A 2 for 1 connection: two Bluetooth headphones or speakers can pair at once so children can watch in silence and give parents A needed break. Note: aptX Low Latency does not support dual pair mode.
- Full control: during receiver mode you have full control of the music including play/ pausing, track selection, and volume control with buttons on the adapter controls. The adapter can connect to traditional device like wired headphones or speakers so they can receive Bluetooth music direct from phones and tablets.
- Always ready: with 20 hours of continuous audio, battery protection, Charging during operation, and pairing memory functionality, you’re always ready for fun.
- Note: in TX mode, the unit should be plugged into the “L and R Audio out” jack or “aux out” jack or the headphone jack on the audio source device.
In the TX mode, the Bluetooth transmitter can be used to stream audio from non-Bluetooth audio sources such as non-Bluetooth TVs or CD players to Bluetooth headphones/speakers. This transmitter is supported to RCA connectors and AUX connectors, therefore, please kindly have a check see whether your audio sources have one of these kinds of jacks. Please note that the adapter should be plugged into the “L&R AUDIO OUT” jack or the “AUX OUT” jack on the audio source but not the “Component IN” jack.
In the RX mode, the Bluetooth adapter could be used as a Bluetooth receiver to non-Bluetooth stereos such as wired headsets or wired speakers. Pair the Bluetooth receiver with your cell phone, and plug your headsets into the jack on this unit, then you will be able to hear the music from your phone.
If the TV does not have the “AUX OUT” jack or the “L&R AUDIO OUT” jack, a headphone jack should also work.
If the TV only have a “DIGITAL AUDIO OUTPUT (OPTICAL)” jack, a convertor is needed or you could choose another model of TaoTronics Bluetooth Transmitters, TT-BA09, which is supported to both aux audio output and optical audio output.
What’s in the box:
1 x TaoTronics Bluetooth 5.0 2-in-1 adapter (Model: TT-BA08)
1 x 3. 5mm 1. 64ft/ 50cm audio cable
1 x 3. 5mm female to 2 RCA male cable
1 x USB Charging cable
1 x User guide
|Dimensions||6.2 × 4.5 × 0.8 cm|